ARMSTRONG PRODUCTS CO -- ADHESIVE MMM-A-134T 1 PART B  -- 8040-00-998-3339
<pre>=====================  Product Identification  =====================

Product ID:ADHESIVE MMM-A-134T 1 PART B
MSDS Date:02/01/1990
FSC:8040
NIIN:00-998-3339
Kit Part:Y
=== Responsible Party ===
Company Name:ARMSTRONG PRODUCTS CO
Address:407 ARGONNE RD
Box:657
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Info Phone Num:219-267-3226
Emergency Phone Num:219-267-3226
Preparer's Name:CHEMICAL COMMODITIES
CAGE:DO043
=== Contractor Identification ===
Company Name:ARMSTRONG PRODUCTS CO
Box:647
City:WARSAW
State:IN
ZIP:46580
Phone:219-267-3226 OR 219-267-5375
CAGE:DO043
Company Name:MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
Address:407-ARGONNE ROAD
Box:647
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Phone:219-267-3226
CAGE:98911

=============  Composition/Information on Ingredients  =============

Ingred Name:DIETHYLENETRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: 1-10%
OSHA PEL:1 PPM
ACGIH TLV:1 PPM, S

Ingred Name:POLYAMIDE RESIN
CAS:37219-83-3
Fraction by Wt: >10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SILICA GEL; (SILICA-AMORPHOUS)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 1-10%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: >10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: STRONG IRRITANT. SKIN:
    CONTACT WILL CAUSE MODERATE IRRITATION. INHALATION: VAPORS MAY
    CAUSE RESPIRATORY IRRITATION. CHRONIC: NO ANTICIPATED CHRONIC
    EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
    ILLNESSES.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
    LEAST 15 MINUTES. CALL MD. SKIN: WASH AFFECTED AREA WITH SOAP AND
    WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHALATION:
    REMOVE TO FR ESH AIR. SUPPORT BREATHING (GIVE OXYGENOR ARTIFICIAL
    RESPIRATION) . INGESTION: CALL MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
    MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . WEAR APPROPRIATE PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.37 
Appearance and Odor:LIQUID

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
    MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE, NITROGEN COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PROD DOES NOT MEET DEFINITION OF HAZ WASTE
    UNDER U.S. EPA HAZ WASTE REGS 40 CFR 261. STATE/LOCAL HAZ WASTE
    REGULATIONS MAY APPLY IF THEY ARE DIFFERENT FROM FEDERAL
    REGULATIONS. INCINERATION/DISPO SE OF IN APPROVED INDUSTRIAL
    LANDFILL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.